- Universal Pool Strapping Kit: Works well on solar pool covers from 10ft to 24ft in width and from 8mm up to 16mm in thickness. This universal attachment kit is designed for in ground solar blanket reels only.
- Easy-to-Essemble Webbing Strap Kit: This nylon strapping kit was the easiest to attche by just snaping the plastic connectors at the edge of the pool cover and threading the strips through same as with the others for only 30 minutes.Please follow the instructions as pic3 when assembling.
- Super Value Complete Solar Blanket Straps Kit: Includes 8×1″wide 71″ long nylon webbing straps,8 buckles, 8 fastener plates. A complete solar reel attachment kit meets your every needs to attach your pool solar cover roller to your existing inground reel system.
- Superior high quality Strips Kit: Constructed of first-class strong and sturdy nylon material, making straps and snaps kit prevent strong UV light and chlorine from crumbling to hold up for at least 1 year.
- Better way to Secure the Straps: Using some big washers and self tapping screws to drill through the end of the strap to properly secure the straps to the blanket roller in case falling off by strong wind.
Package Dimensions: 57x271x272
Have you noticed that you have to replace the straps on your pool cover and reel about every season? Move to a plastic product that prevents swimming pool scum from sticking to the pole ropes. This universal attachment kit easily attaches your new solar cover to your existing in-ground reel system.
Products Highlights: 1.Made of superior strong and sturdy nylon material, nicely prevent strong UV light and chlorine from flimsy. 2.Pool strap kit contains all the parts to attach a solar blanket to your reel. 3.Perfect fit for all kinds of inground solar blanket covers from 10ft to 24ft in width and from 8mm up to 16mm in thickness. 4.Quick and easy to install for only 30 minutes by following the instructions. 5.The attachment system for attaching the straps to the reel has the benefit of not damaging the aluminum reel. 6.11 months warranty guaranteed
Assembling Instructions: STEP1:Tear double-sided tap on the fasteners STEP2:Stick the fasteners on tube, then stick the top of strap with the fasteners STEP3:Pass the trap through buckle STEP4:Pass the trap through the plate STEP5:Pass the trap through the buckle again STEP6:Installation finished. Rolling reel up!
Kit Includes: 8 x Straps (1 x 71″) 8 x self-adhesive fasteners 8 x Fastener plates (1.75 x 2.76″) 8 x Buckles (0.9 x 1.25″)
Notes: 1.This kit only works for in-ground swimming pools. 2.Discard the sticky patches, use a grommet tool to put grommets into the ends of the straps, drill holes in the reel for each strap, and attach the straps with screws to the reel would make the straps more secure.